Water leaks detection in the early stage can save you money and avert potential disaster. There are several things that you can do to detect leaks at home before it gets serious. If there are any potential or serious leaks in your home, immediately contact a professional plumber to handle the problem.

Check your toilets

The first thing you’ve to do is to check your toilets. The toilets in your home will use more water, if there is a leak then it will consume more than usual amount of water. To detect the leak within a toilet, remove the lid from the tank, carefully listen for any noises. 

If you hear any strange sound, then try to find the leakage area. Suppose if you don’t hear any noise, then add red food coloring to the tank. Wait for some time and check the toilet bowl. If the bowl turns a pink color, then there’s a leak. Be sure to check each toilet in the same way.

Examine Your Water Bill

Water leaks can cause significant damage to your home, and it is best to detect them early. The easiest way to do so is by checking your water bills, which should always be on top of your priority list. If you notice a sudden hike in the bill amount within the past month or so, then there could be huge leakage somewhere around your house.

Inspect Your Pipes

Inspect your pipes regularly. If plumbing fixtures are not sealed properly, it will make hissing noises. Also check the exit path of water to detect if there are any leaks, like wet cracks on surfaces near it.

Use a flashlight to check if there are wet or dry locations on the pipe exit because the leak areas can be hard to spot sometimes. 

Check the Hot water tank

Check the hot water tank and the pressure relief valve. This valve might be inside a drain so it’s somewhat hard to detect a leak. If you hear hissing noises, there is a leak. Call a professional plumber if you detect a leak within your hot water tank. 

Another way to check for a leak associated with the hot water tank is to look for water drains near the tank. Also, check for moisture on the bottom of the discharge tube. 

Check your Meter line

First, locate the shut-off valve by the house. Shut it off temporarily, remove the lid from the meter and watch the dial.

If the lid for the meter isn’t visible, then clean the dirt and other debris located around it. Dirt sometimes builds up and covers the meter. If the lid opens, check whether the meter is still turning. 

If it is, the leak is between the meter and your house or a leaking valve. If this continues, the leak can be inside your house. To determine where the leak is at, first, walk the length between the meter and the shut-off valve. If you’ve located this spot, it’s best to call in a professional plumber.